Search

Tuesday 16 September 2014

Tuesday Stuff

Vic - ready for work
Dave, Dave, Nigel & Colin cleaning HL No.2 .....
..... before Ian & Dave take it to East Tanfield
en route to NRM Shildon
Dave helping to load No.2 at East Tabfield
(photos courtesy of Ian Cowan)

Dave bending bar for cranked point rod ends .....
..... checking the result .....
..... and Nigel tweaking the angles
Colin enlarging bolt holes in concrete sleepers ....
..... through which John passes bolts
Dave drilling short rails ....
..... which John & Colin drop on the sleepers .....
..... then Colin fastens the whole lot together
Rob making up point roller mounts; Rob & Dave freeing point rodding cranks

Ian freeing point rod ends .....
..... and making pins for the rodding